Go BottomL2250 steering
 | greasyfingers
Join Date: Jul 2003 Posts: 1 CA 
|
2002-08-28 41714
My PS is gone. A new box is a grand!!!! Does anyone know what the adjustment screw does at the botom of the power steering unit....mine is frozen. It looks like the first place to start.
Reply to |
Quote Reply |
Add PhotoL2250 steering
| TomG
Join Date: Feb 2002 Posts: 5406 Upper Ottawa Valley 
|
2002-08-28 41725
I'm out of time today and will get back to this. In the meantime, a useful question might be why there's certainty that the steering sector is bad? Pumps or priority valves might be bad or a pressure relief valve might be bad.
Most steering sectors have a screw for adjusting backlash in the sector gears (steering wheel play). Depends on the system, but a frozen sector gear adjustment may be a better sign that the sector needs work than that the PS isn't working. Even if the sector needs work, it’s likely that only some parts rather than an entire ly new sector is needed.
Having a repair manual before tearing into this is a good idea. If you take much of a sector apart, then bearing pre-loads must be reset, and specs and a procedures are needed.
....
Reply to |
Quote Reply |
Add PhotoL2250 steering
 | Murf
Join Date: Dec 1999 Posts: 7249 Toronto Area, Ontario, Canada
 Pics
|
2002-08-28 41726
Not being one to bring up a stupid question, but, did you check the obvious, like fluid?
Best of luck. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This